American Woodworker

Free Product Guide >>

Syndication

 


 

 

 

Woodwork 

Winter 2013-2014

Preview this issue

 

American Woodworker Magazine: Index of past issues (V)

RATE THIS:

A   B   C   D   E   F   G  H   I   J  K  L   M   N   O   P   Q   R   S   T   U   V  W   XYZ

V
V-belts. See drive belts
vacuum clamping, 46:36–46:39
 Carter's MiniMach reviewed, 73:94–73:96
 jigs for, 46:37–46:39, 84:18
 pumps for, 46:36–46:37
 systems, source, 46:39, 77:49
 West Oak K-B4 kit reviewed, 81:88
vacuum veneer press. See also veneer press
 buyer's guide, 44:50–44:53
 review, 24:14
vacuum veneering
 production presses, 44:52
 pump
  choosing, 44:51–44:52
  small shop-made, 29:18
 pump noise, 45:6
 techniques, 44:51
Vacuums
 shop
  recommended 2001, 92:104
 shop, recommended 2001, 92:104
 switches for
  tool-activated, 92:24
 switches for, tool-activated, 92:24
vacuums, shop. See shop vacuums
Van Arsdale, Jay
 Japanese sawhorses, 12:48–12:52, 52:50
 knockdown sawhorses, 52:51
Van Campen, Nancy, antique paint finishes,
  4:52–4:53
Varnish
 wire hangers for, 86:78
varnish. See also finishing; specific type
 and oil blend, 35:32–35:33
 applying, 11:37–11:41, 43:72–43:74
 brush for, 43:72
 choosing, 43:72, 61:53
 color matching with glue, 37:20
 conversion, 58:82
 finishing techniques, 57:30, 61:52–61:55
 food-safe, 78:104
 polyurethane, properties, 5:8
 sizing with, 58:69–58:70
 spraying, 64:18, 81:92
 two-part catalyzed, source, 32:51
 types, 11:37–11:41
 violin, source, 9:8
 water-based, 4:52
Varnish, wire hangers for, 86:78
Vaughan-NAHWW scholarships, 45:18
Vega
 lathe 1446
  reviewed, 98:96–97
 lathe 1446, reviewed, 98:96–97
 miter gauges
  reviewed, 90:108
 miter gauges, reviewed, 90:108
 mobile base MMK-1, 107:58, 107:64, APR 04:58,
   APR 04:64
Veneer
 bookmatching, 87:87
 contact cement for
  disadvised, 103:16
 contact cement for, disadvised, 103:16
 glues for, 103:16
 on curves
  method for, 85:26
 on curves, method for, 85:26
 over lamination, 87:86–87
 saws for, 87:89
 source for, 87:89
veneer. See also veneer press; veneering
 buying, 42:67
 edging options, 16:27–16:29, 42:70
 glue, sources for, 56:18
 gluing options, 16:27, 42:68–42:70
 hammer, from chisel, 46:20
 inserting in edge joints, 50:32–50:33
 jointing, tablesaw jig for, 42:68
 making your own, 42:71, 57:14, 65:104, 80:30,
   81:51
 panels, 16:26–16:29
 patterns, 16:28
 peel-and-stick, 56:16–56:18
 plain-sliced vs. rotary-sliced, 80:106
 removing antique, 71:26
 repairing, 4:6–4:7, 38:18–38:20, 64:70–64:73,
   65:57, 84:58
 sawing tips, 68:84
 saws and cutters
  sharpening, 68:84
  shop-made, 52:20
 sources for
  "Hollowood" veneered wood cylinders, 65:22
  banding, 68:85
  Brazilian rosewood, 35:69
  business cards, 30:12
  cherry, 75:58
  commercial, 16:27, 40:39, 42:70
  figured, 26:10
  quartersawn white oak, 74:57
  sawn, 15:6, 16:27
  specialty, 64:57
 storing, 68:34–68:36
 substrates for, 16:26
 trimming with router, 36:14–36:16
veneer press. See also vacuum veneer press
 plans, 16:30–16:31
 screw for, source, 34:36, 38:35
 shop-made, 40:37
 types, 16:26
veneer tape, sources for, 58:49
veneering. See also vacuum veneering
 basics, 42:66–42:70
 bookmatching, 16:28
 hammer, 16:26
 leather, 68:54–68:55
 matching grain, 42:69
 materials and supply sources, 16:28, 40:39, 42:70,
   68:85
 panels, 74:53
 quarter-matching, 16:28
 radial, 16:28
 raised panel, 68:70–68:73
 resawing for, 16:26–16:27
 reverse slipmatching, 16:28
 slipmatching, 16:28
 techniques, 16:26–16:27, 64:56–64:59
 thickness requirements, 66:18–66:20
 tools, 64:71
 woods for, 16:26–16:29
ventilation devices, for cabinets, 57:55
Ver Steeg, Matt
 saw-blade stabilizer, 47:14–47:16
 sharpening saw blades, 45:54–45:55
Verchot, Remi, multiaxis lidded boxes, 71:72–71:75
Veritas
 block plane, 100:35
 planes
  reviewed, 104:90–92
 planes, reviewed, 104:90–92
 router table
  reviewed, 92:70–71
 router table, reviewed, 92:70–71
 router-table plate
  reviewed, 85:87, 85:89
 router-table plate, reviewed, 85:87, 85:89
 router-table plates
  recommended, 90:123
 router-table plates, recommended, 90:123
 sharpening machines
  recommended, 90:124
  reviewed, 89:79, 89:80–81
 sharpening system Mark II, 105:22
 spokeshave, 107:35, APR 04:35
 wheeled marking gauge
  reviewed, 93:37, 93:108
 wheeled marking gauge, reviewed, 93:37, 93:108
Veritas Beading Tool, review, 37:69
Veritas Honing Guide and Angle Jig review and
  source, 20:35
Veritas Poly Gauge Jig, review, 17:14
Veritas tools
 tenon cutter, 99:6
Veritas tools, tenon cutter, 99:6
Vessels
 mesquite, 87:50
Vessels, mesquite, 87:50
Vicmarc
 lathe VL100
  recommended, 97:64
 lathe VL100, recommended, 97:64
 mini-lathe
  recommended, 90:120
 mini-lathe, recommended, 90:120
Viking furniture, 23:26–23:27
Vincent, Ed, fans for solvent spraying, 49:12–49:14
vintage tools. See antique tools
vinyl drawer guides. See drawer guides and slides
vinyl sheeting, sources for, 73:108
violetwood. See purpleheart
Vises
 front
  plywood, 89:35, 89:42–43
 front, plywood, 89:35, 89:42–43
 handles for
  crank, 85:18
 handles for, crank, 85:18
 installing, 105:49
 machinist's
  cleats for, 104:33
 machinist's, cleats for, 104:33
 recommended 2001, 92:104
 tail
  from handscrews, 89:36, 89:40, 89:42
  with bar clamp, 111:17
 tail, from handscrews, 89:36, 89:40, 89:42
 with hand screws, 99:27
 wood jaws for, 98:25
vises
 bench
  auxiliary, 68:36
  grip helper, 6:10, 53:22
  review, 22:14
 blocks, magnetic, 37:26
 features and types, 82:88–82:90
 jaw pads, 40:24, 52:22
 metal, 26:54–26:57
 protecting while clamping, 47:28
 quick-release wooden, 66:62–66:65
 racking, how to avoid, 82:91
 reviewed and American Woodworker rated, 82:92
 shoulder, reinforcing, 27:8
 sources for, 82:90
 tail, 45:51–45:53
 wooden, 26:54–26:57
 workbench types, 55:8–55:9, 55:12–55:13
Vix-Bits
 review, 20:32
 wooden V-block, 1:42–1:43
VOCs. See volatile organic compounds
volatile organic compounds (VOCs)
 in mineral spirits, 84:28
 in waterborne polyurethane, 77:110
 safety, 53:58–53:59
Volker, David, shop-made mortiser, 44:96
voltage. See motors; wiring
Vondriska, George
 antique tools and restoration, 83:46–83:50
 bandsaw duplicator reviewed, 82:101
 bandsaw jigs, 74:42–74:49
 bandsaw set up, 74:47
 belt sander review, 79:66–79:69
 blade cleaner, 84:24
 BladeGauge reviewed, 81:86
 Carter's MiniMach reviewed, 73:94–73:96
 Delta disc sander reviewed, 81:86
 Delta Sliding Table attachment reviewed,
   74:82–74:83
 flush-trim router bit with Teflon bearing, 84:24
 future of woodworking, 83:106–83:109
 Japanese pull planes reviewed, 81:89
 Jet Professional Woodworking Lathe, 77:94
 layout tool reviewed, 82:98
 layout, tips for accurate, 73:58–73:63
 lock-miter joints, 79:57–79:59
 miter gauges reviewed, 81:81–81:83
 on belt sander, 110:67–69
 on cabinets, 95:60–75
 on cathedral doors, 111:53–62
 on dial indicators, 112:26–36
 on drum sander, 100:40–45
 on face-frame cabinets, 91:74–86
 on jewelry box, 93:80–90, 93:80–90
 on new products, 107:34–38, 112:20–24, APR
   04:34–38
 on outfeed table, 107:80–86, APR 04:80–86
 on panel doors, 86:32–43
 on pocket-hole jigs, 104:54–57
 on products, 106:22–26
 on raised panels, 95:34–40
 on raised-panel doors, foldout
 on router-table fence, 92:87–91
 on routers, 99:64–71, 106:58–65
 on shop accessories, 105:22–25
 on shop equipment, 100:34–38
 on shop products, 98:30–38
 on shop supplies, 108:18–24
 on shops, 109:12–16
 on tool cabinet, 96:60–69
 on tools, 104:34–43, 111:46–51
 on well-equipped shop, 93:28–37, 102:30–33,
   103:30–34
 on workshop tips, 101:22–26
 Osborne EB-2 Miter Gauge reviewed,
   72:98–72:100
 oscillating spindle sanders reviewed, 82:96–82:97
 Performax 16-32 drum sander reviewed,
   75:85–75:86
 pocket-screw joinery and jigs, 72:84–72:89, 84:22
 reclaimed timber, 77:83–77:85
 resawing with a bandsaw, 81:45–81:51
 router review, 78:75–78:79
 routers, selecting, 83:85–83:89
 shop gadgets, 73:88–73:90
 shop vacuums reviewed, 80:69–80:73
 sliding compound-miter saws, buyer's guide,
   84:98–84:109
 tablesaws, selecting, 83:72–83:76
 vacuum clamp kit reviewed, 81:88
 working in a small shop, 78:46–78:51
Vrondriska, George
 on shop equipment, 94:32–40
Vrondriska, George, on shop equipment, 94:32–40

 

A   B   C   D   E   F   G  H   I   J  K  L   M   N   O   P   Q   R   S   T   U   V  W   XYZ


Filed under: