American Woodworker

Free Product Guide >>

Syndication

 


 

 

 

Woodwork 

Winter 2013-2014

Preview this issue

 

Blade Caddy

RATE THIS:

Blade Caddy


Here’s a handy tote for scrollsaw blades that I fashioned from a scrap of 2x6, a piece of plywood, and two Peg-Board multiple-tool holders. I cut the curved tips off the multiple-tool holders with a hacksaw so they would sit flat against the plywood.

I attached the holders to the caddy with cable staples. These small plastic tubes are perfect for holding scrollsaw blades. I wrapped some masking tape around each tube and wrote the blade size on it.

You may also like...

Cordless Drill Stand

Dovetailed Tool Box




This story originally appeared in American Woodworker May 2003, issue #100.

May 2003, issue #100

Purchase this back issue.