American Woodworker

Free Product Guide >>

Syndication

Blade Caddy

RATE THIS:

Blade Caddy


Here’s a handy tote for scrollsaw blades that I fashioned from a scrap of 2x6, a piece of plywood, and two Peg-Board multiple-tool holders. I cut the curved tips off the multiple-tool holders with a hacksaw so they would sit flat against the plywood.

I attached the holders to the caddy with cable staples. These small plastic tubes are perfect for holding scrollsaw blades. I wrapped some masking tape around each tube and wrote the blade size on it.

You may also like...

Cordless Drill Stand

Dovetailed Tool Box