American Woodworker

Free Product Guide >>

Syndication

The Woodworker's Shop

1 | 2 | 3 | 4 | 5 | Next
  • AW Extra 7/10/14 - Shop-Built 3-Jaw-Chuck

    by American Woodworker Editors     Tuesday, July 8, 2014
    Shop-Built 3-Jaw-Chuck A cheap, effective turning tool. Three-jaw lathe chucks are virtually indispensable for a turner, yet the cost of buying one can be prohibitive. Three-jaw chucks are useful when turning small pieces at low speed, and permit multi...
  • AW Extra 5/29/14 - Folding Worktable

    by American Woodworker Editors     Wednesday, May 28, 2014
    Folding Worktable This simple, roll-around worktable fits in tight spaces yet expands to a huge work surface. By David Radtke Here’s a work space that’s huge and accessible from all sides, yet folds up and stows away easily. If you don’t...
  • AW Extra 5/15/14 - Ultimate Tool Stand

    by American Woodworker Editors     Monday, May 12, 2014
    Ultimate Tool Stand An easy-to-use space saver with more functions than a Swiss army knife. By Dave Munkittrick For those of us who share shop space with a car or a washer and dryer, elbowroom is always a problem. This tool stand is the answer. A 2 ft...
  • 3 Classic Vises made with Pipe Clamps

    by American Woodworker Editors     Monday, February 24, 2014
    3 Classic Vises made with Pipe Clamps Increase your bench’s versatility on a budget. By Chad Stanton As a professional woodworker, leaving the comfort of my shop to work on a jobsite is part of the routine. I always take along a portable bench that’s...
  • AW Extra 1/16/14 - Roll-Around Shop Cabinet

    by American Woodworker Editors     Thursday, January 16, 2014
    Roll-Around Shop Cabinet This wooden cavern holds tons of tools, plus it doubles as a bench outrigger. By Ian Kirby For tough and intelligent tool storage, it’s hard to beat a professional mechanic’s tool chest. It has shallow full-extension...
  • AW Extra 11/21/13 - Flammables Cabinet

    by American Woodworker Editors     Tuesday, November 19, 2013
    Flammables Cabinet Keep your shop and family safe! Have you got finishing supplies scattered all over your shop? Concerned that they’re a fire hazard? Organize them into this cabinet built out of one sheet of plywood and you’ll sleep better...
  • AW Extra 10/31/13 - Tablesaw Storage Cabinet

    by American Woodworker Editors     Monday, October 28, 2013
    Tablesaw Storage Cabinet All of your tablesaw accessories close at hand By Eric Smith The last time I could find them all, I counted 18 accessories for my tablesaw. Dado set, push sticks, throat plates, extra blades, miter gauges, tenoning jig, wrenches...
  • Chad's Sawhorse Workbench

    by woodworkerBryan     Wednesday, July 10, 2013
    Chad's Sawhorse Workbench Stacking sawhorses serve a dual purpose. By Chad Stanton I usually need a pair of sawhorses when I'm working outside the shop, but sometimes I also need a bench. Here's both, rolled into one. The bench is actually...
  • Make Your Own Blast Gates

    by American Woodworker Editors     Monday, June 3, 2013
    Make Your Own Blast Gates They’re cheap! All you need is some PVC and plastic laminate. By Alan Schaffter A central dust collection system is a big improvement to any shop, but the cost can really add up. With commercial gates going from $4 to over...
  • AW Extra 9/12/13 - Chad's Stepbox

    by American Woodworker Editors     Monday, June 3, 2013
    Chad's Stepbox Learn how to make compound-angle dovetails building this handy stool and portable tool box. Chad Stanton For my job as a trim carpenter and furnituremaker, I’ve always needed a sturdy stool to stand on. I’ve also wanted...
  • AW Extra 7/11/13 - Adjustable Height Assembly Table

    by American Woodworker Editors     Monday, June 3, 2013
    Adjustable Height Assembly Table Check out these clever legs: they ratchet up and down with ease. By Alan Schaffter “An adjustable assembly table, huh? Well, you’re wasting your time unless it’s a simple design that’s easy to operate...
  • Ginormous Shop Cabinet

    by American Woodworker Editors     Wednesday, April 24, 2013
    Ginormous Shop Cabinet 26 drawers for tools and supplies. By Dr. Warren Kragt My beat-up garage-sale seven-drawer metal tool cabinet was an eyesore. I wanted something bigger and better, but mostly I wanted something that looked like it belonged in a...
  • Shopmade Handscrews

    by American Woodworker Editors     Wednesday, April 24, 2013
    Shopmade Handscrews Thread your own wooden screws. By Steven Bunn Even though I have a small fortune invested in tools, I always seem to be short of wooden handscrew clamps. But daydreaming about buying ten more of these versatile tools runs smack into...
  • Wooden Tail Vise

    by woodworkerBryan     Monday, March 4, 2013
    Wooden Tail Vise Upgrade your bench and your woodworking by adding a classic vise. By Steve Bunn You can do without a tail vise. But you can do much more with one. That’s why woodworkers have depended on tail vises for over 400 years. A tail vise...
  • AW Extra 2/7/13 - Mobile Router Center

    by American Woodworker Editors     Tuesday, February 5, 2013
    Mobile Router Center This rolling router center has onboard storage for all your router components, folds into a tidy package, serves as an extra work surface and rolls out of the way when you're done! By George Vondriska Use It! Click any image to...