American Woodworker

Free Product Guide >>

Syndication

 


 

 

 

Woodwork 

Winter 2013-2014

Preview this issue

 

Reindeer parts

RATE THIS:

To make that Reindeer:

Basically, just four different kinds of parts, you'll need to make two of the front and back legs

a body from that 1x6

Antlers, note the grain direction.   Use a 3/8s round-over bit on both sides, the notch is cut to fit the notch in the body

rear leg, the notch at the back is about 3/8", round over on the outside only

front leg,  again, just round over the outside edges.   


Filed under: