American Woodworker

Important Information >>

Syndication

AW Extra 10/25/12 - Get the Burn Out

RATE THIS:

Get the Burn Out

By Dave Munkittrick

Arrgh, another burned cut! Don’t you hate it when this happens? Here’s a fix. Shim out the workpiece with thin cardboard and take a second light cut. Burning most commonly occurs on end grain or when you use a dull bit. Feeding the workpiece too slowly also can cause burning.


This story originally appeared in American Woodworker July 2004, issue #108.

July 2004, issue #108

Purchase this back issue.