American Woodworker

Free Product Guide >>

Syndication

 


 

 

 

Woodwork 

Winter 2013-2014

Preview this issue

 

Snap-On Soft Jaws

RATE THIS:

Snap-On Soft Jaws

I’ve been using an old metal-working vise in my shop for years. Occasionally I really do need a metal-working vise, but most often I use it to hold drawer sides up high when cutting dovetails. Unfortunately the metal jaws can be a hazard to edge tools and they can mar the surface of the wood. I solved these problems by adding a pair of soft jaws to the vise. The jaws are just two pieces of pine with a couple holes for recessed rare earth magnets. The soft jaws literally snap in place to provide a non-marring clamp surface for my stock plus a non-threatening surface for my edge tools.




This story originally appeared in American Woodworker January 2003, issue #98.

January 2003, issue #98

Purchase this back issue.