American Woodworker

Important Information >>

Syndication

AW Extras 4/3/14 - Tablesaw Tool Drawer

RATE THIS:

Tablesaw Tool Drawer

It seems like I’m always misplacing my push sticks, blade wrench, featherboards and other small tablesaw accessories.To solve my problem I added a shallow drawer under the side feed table. I simply built a wood box that was open in the front and screwed it to the bottom of my side table. Then I installed a drawer using a set of 22-in. full-extension heavyduty drawer slides. The slides cost me $14 and I used leftover plywood. It didn’t cost much but it sure provides a lot of convenience.




This story originally appeared in American Woodworker July 2003, issue #101.


July 2003, issue #101

Purchase this back issue.