American Woodworker

Free Product Guide >>

Syndication

 


 

 

 

Woodwork 

Winter 2013-2014

Preview this issue

 

Woodworking Shop

  • Double Scrollsaw Blade Life

    by American Woodworker Editors     Thursday, October 15, 2009
    When my scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood I cut is usually less than 1/2 in. thick. To get more life out of my blade, I made an auxiliary table that raises the workpiece, so I can cut with the...
  • Zero Clearance Dust Port

    by American Woodworker Editors     Tuesday, June 30, 2009
    Zero clearance inserts are wonderful for eliminating tearout, but unfortunately, they also impede dust collection. To give my collection system an opening to pull sawdust through, I cut a 1/2-in.-dia. hole at the front end of the blade slot. In this location...