Woodstock International Shop Fox Tablesaw
Introducing the New SHOP FOX ® Model W1824 Hybrid Table Saw with Riving Knife and Extension Table
• 2 HP, 110V/220V, single-phase motor
• Deluxe blade guard with independent-lifting sides and quick-change riving knife
• Cuts up to 30" right-of-blade and workpieces up to 3-1/8" thick
• Poly-V serpentine belt drive system runs quieter and smoother than traditional V-belt drive systems
• Large table area with low-friction, phenolic-coated extension table
• Camlock T-shaped fence has HDPE faces, is solid and accurate, and extremely simple to use
The W1824 has a suggested list price of $1,495. All Shop Fox machines are covered by a 2 year warranty.
For more information on this product, other items in the Woodstock or Shop Fox line of products, or to locate a
distributor near you, contact Woodstock International, Inc., by mail at P.O. Box 2309, Bellingham, WA 98227,
by telephone at (800) 840-8420, or by email at email@example.com. The company’s website is located at
Woodstock International, Inc.
P.O. Box 2309
Bellingham, WA 98227
Phone: (800) 840-8420
WOODWORKING TOOLS AND ACCESSORIES:
HYBRID TABLE SAW WITH EXTENSION TABLE
Type: TEFC Capacitor Start Induction
Horsepower: 2 HP
Amps: 16A at 110V, 8A at 220V
Speed: 3450 RPM
Cycle: 60 Hz
Number of Speeds: 1
Power Transfer: Poly-V Serpentine Belt Drive
Bearings: Lubricated and Permanently Sealed
Maximum Blade Diameter: 10 in.
Riving Knife/Spreader Thickness: 0.1 in. (2.5mm)
Required Blade Body Thickness: 0.070 – 0.094 in. (1.8mm – 2.4mm)
Required Blade Kerf Thickness: 0.102 – 0.126 (2.6 – 3.2mm)
Maximum Width of Dado: 13/16 in.
Blade Tilt: Left 0-45 deg.
Arbor Size: 5/8 in.
Arbor Speed: 3850 RPM
Arbor Bearings: Sealed and Permanently Lubricated
Maximum Depth of Cut At 90 Degrees: 3-1/8 in.
Maximum Depth of Cut At 45 Degrees: 2-3/16 in.
Maximum Rip To Right of Blade-Standard: 30 in.
Maximum Rip To Left of Blade: 12 in.
Floor To Table Height: 34 in.
Table Size Width: 55 in.
Table Size Depth: 27 in.
Table Size Thickness: 1-1/2 in.
Distance Front of Table To Center Of Blade: 16 in.
Distance Front of Table To Blade At Maximum Cut: 11-1/2 in.
Fence Type: Camlock T-Shaped Fence w/HDPE Side Plates
Fence Size Length: 34-1/4 in.
Fence Size Width: 3-1/8 in.
Fence Size Height: 2-1/2 in.
Fence Rail Type: Square Steel Tubing
Fence Rail Length: 59-5/8 in.
Fence Rail Width: 2 in.
Fence Rail Height: 1-5/8 in.
Miter Gauge Information
Miter Gauge Slot Type: T-Slot
Miter Gauge Slot Size Width: 3/4 in.
Miter Gauge Slot Size Height: 3/8 in.
Table: Precision-Ground Cast Iron
Wings: Cast Iron; Phenolic w/Low Friction Surface
Cabinet: Pre-Formed Steel
Trunnions: Cast Iron
Fence Assembly: Steel with HDPE Side Plates
Miter Guage: Aluminum
Guard: Steel and Clear Plastic
Other Related Information
Paint: Powder Coated
Number of Dust Ports: 1
Dust Port Size: 4 in.
Mobile Base: D2057A
Weight: 404 lbs.
Width (side-to-side) x Depth (front-to-back) x Height: 58 x 36 x 40 in.
Footprint (Length x Width): 20 x 21-1/2 in.
Type: Cardboard/Wood Skids
Weight: 368 lbs.
Length x Width x Height: 30 x 26 x 42 in.
Weight: 18 lbs.
Length x Width x Height: 37 x 17 x 7 in.
Weight: 32 lbs.
Length x Width x Height: 63 x 5 x 4 in.
Power Requirement: 110V/220V, Single Phase, 60 Hz
Prewired Voltage: 220V
Full-Load Current Rating: 16A at 110V, 8A at 220V
Minimum Circuit Size: 20A at 110V, 20A at 220V
Switch Voltage: 220V
Cord Length: 6 ft.
Cord Gauge: 14 gauge
Plug Included: Yes
Included Plug Type: NEMA 6-20 for 220V
Recommended Plug/Outlet Type: NEMA 5-20 for 110V
ISO Factory: ISO 9001
Country Of Origin: China
Warranty: 2 Year
Serial Number Location: ID Label on Cabinet
Assembly Time: Approximately 1 Hour
Precision-ground cast iron table
Cast iron trunnions
4" dust port
T-slot miter gauge
Camlock T-shaped fence with HDPE face
Easy glide fence system
Powder coated paint
Quick-release riving knife and blade guard assembly
Knurled knobs for adjusting fence
Includes regular & dado blade table inserts
Device on blade guard allows enabling/disabling anti-kickback pawls