American Woodworker

Free Product Guide >>

Syndication

 


 

 

 

Woodwork 

Winter 2013-2014

Preview this issue

 

Woodworking Tools

1 | 2 | 3 | 4 | 5 | Next
  • Tool News - Milwaukee® Shockwave™ Impact Duty Accessories

    by American Woodworker Editors     Wednesday, May 25, 2011
    Milwaukee® Shockwave™ Impact Duty Accessories Milwaukee Electric Tool Corporation introduces over 80 new products in its new line of Shockwave™ Impact Duty accessories. Delivering high performance and functionality, the full range solution...
  • Dream Sharpening Machine

    by AW-Editor     Thursday, January 29, 2009
    "What? A $600 machine that just sharpens hand tools?" That's the reaction I've heard when introducing my pals to the latest in sandpaper-sharpening technology, the Lap-Sharp LS-200. It's the brainchild of a single-minded engineer...
  • Don't Use Smelly Glue

    by Tim Johnson     Monday, February 23, 2009
    Buying glue by the gallon costs less, but it may not be a good investment if you use glue infrequently. After a while, leftover glue can develop a bad smell. According to the folks at Franklin Adhesives, your best bet is to toss the old stuff and buy...
  • Tool News - Kreg Micro Pockethole Jig

    by American Woodworker Editors     Friday, May 29, 2009
    Kreg will be adding a new jig to their popular pockethole joinery selection of products. The Micro Pockethole Jig creates a hole that is 25% smaller than the original and uses shorter screws, which means you can use pockethole joinery with thinner stock...
  • Eliminate Fuzzy Fillets

    by AW-Editor     Sunday, May 11, 2008
    Freud's new Quadra-Cut router bits produce routed profiles with little or no tear out or fuzz even on cross-grain cuts. These unique, patented bits employ four cutting edges instead of two. The large profile cutters remove most of the stock with an...
  • Tool News - C.H. Hanson Ball Level

    by American Woodworker Editors     Tuesday, July 14, 2009
    The Precision Ball Level is a three-in-one tool that includes a patented precision aviation ball compass design that expands the use of the level beyond its traditional job of indicating level and plumb surfaces. With a simple glance, the Precision Ball...
  • Tool News - 1-2-3 MicroGage

    by American Woodworker Editors     Tuesday, June 23, 2009
    The 1-2-3 MicroGage combines the precision of the 1-2-3 Block and the dial indicator in a small compact footprint. The block, milled to 0.0001" tolerance, is used by machine shops as a precision measurement and set up tool. It measures 1" thick...
  • Tools News - Dremel Detail Abrasive Brush

    by American Woodworker Editors     Wednesday, August 5, 2009
    The Detail Abrasive Brush is compatible with all multi-speed Dremel rotary tools and fits on both the 402 and EZ402 mandrels. It is recommended that users apply only light pressure when using the accessory and work at speeds of 15,000 rotations per minute...
  • Waterstones

    by American Woodworker Editors     Thursday, August 6, 2009
    Hone an incredibly sharp edge with a $35 combo stone. by Tom Caspar For this woodworker, it doesn’t get any better than using a sharp hand tool. Not just kind of sharp, the way new tools come out of the box. I mean really, really sharp, with an...
  • Tools News - Milescraft Finish Carpentry Line

    by American Woodworker Editors     Saturday, November 1, 2008
    Now that the drywall has been hung, its time to finish the room with a finish carpentry accessory from Milescraft. Rout mortises in doors and jambs, cut crown molding the easy way, and install precisely cut casement trim for a perfect fit with these finish...
  • Product News - Spectrum Concepts 720 System Cabinet Inserts

    by American Woodworker Editors     Tuesday, September 15, 2009
    Spectrum Concepts has introduced the latest addition to their line media storage furniture components with the Flipworks Ultimate Fixed Mount Media Storage Tray System. These trays are perfect for use in any furniture or storage application. They mount...
  • Tool News - Rockler Downdraft Panels

    by American Woodworker Editors     Tuesday, July 28, 2009
    Rockler recently introduced its new Downdraft Table Panels, giving woodworkers a simple ready-made solution for a non-slip, perforated downdraft table surface. Designed to improve the breathability and productivity of any workshop, the new Rockler panels...
  • Tool News - VETO Pro Pac

    by American Woodworker Editors     Monday, September 21, 2009
    The VETO Pro Pac (VETO stands for VErtical Tool Organization) is a line of rugged bags made to replace the traditional tool box. Starting at $120, every model is solidly built and features dozens of pockets, all tiered to fit tools, big and small –...
  • Tool News - Rockler SpeedCope

    by American Woodworker Editors     Tuesday, September 15, 2009
    Rockler just introduced the SpeedCope, a new heavy-duty jig that helps make cope cuts for tight fitting overlapped joints in crown and base molding. Coped joints have long been the inside corner joint of choice among finish carpenters. To make them, a...
  • Tool News - Flexaust Conductive Vacuum Hose

    by American Woodworker Editors     Wednesday, September 30, 2009
    Flexaust Genesis DPZ-C Hose is a conductive, flexible all plastic hose that features a smooth interior for efficient air flow at full 29” Hg vacuum and an abrasion-resistant flat exterior which bends tightly and drags easily. Designed to prevent...