American Woodworker

Important Information >>

Syndication

Woodworking Tools

1 | 2 | Next
  • Woodworking Tool News - Multipurpose Clamp Aids

    by American Woodworker Editors     Friday, September 28, 2012
    Multipurpose Clamp Aids By Brad Holden The "universal clamping block" really lives up to its name. It’s just a flat aluminum bar with a loop on one end, yet it can be used to clamp a mitered frame, a workpiece on a drill press, the sides...
  • Woodworking Tool News - Rockler Clamp-It Kit

    by American Woodworker Editors     Tuesday, January 31, 2012
    Rockler Clamp-It Kit Rockler Woodworking and Hardware has introduced the Universal Clamp-It™ Kit. Rockler Woodworking and Hardware has introduced the Universal Clamp-It™ Kit, a unique set of tools that ensure square when joining any two pieces...
  • Micro Fence Jig

    by American Woodworker Editors     Wednesday, November 30, 2011
    Micro Fence Jig Micro Fence has introduced a new package for use with various manufacturers’ straight-edge extruded clamps and tool guides so that any manufacturer’s router can be used with it. Measured adjustments to the dimension or position...
  • BESSEY U Style Bar Clamp

    by American Woodworker Editors     Tuesday, November 29, 2011
    BESSEY U Style Bar Clamp LMU light duty bar clamp The light duty U style bar clamp offers a unique step-over design for those hard to reach spaces. It is small, light weight and very handy. Comes with non-marking plastic caps on both jaws to protect the...
  • Rockler's Quick-Release Pock-it Hole Clamp

    by American Woodworker Editors     Tuesday, August 16, 2011
    Rockler's Quick-Release Pock-it Hole Clamp The Pock-It Hole Clamp® — which marked vast improvement in the pocket hole joinery process — has been enhanced with a new push-button quick release feature. This new feature allows the clamp's...
  • Tool News - Bora Wide Track Clamp Edge

    by American Woodworker Editors     Tuesday, August 2, 2011
    Bora Wide Track Clamp Edge Featuring solid construction and a wider base, the Wide Track is sturdier than a typical straight edge guide, allowing for clean, precise cuts. BORA®, a product division of Affinity Tool Works, introduces its updated Wide...
  • Tool News - BESSEY Self-Adjusting Toggle Clamps

    by American Woodworker Editors     Tuesday, July 26, 2011
    BESSEY Self-Adjusting Toggle Clamps With the new self-adjusting toggle clamps from BESSEY, work pieces of differing thicknesses can be quickly and securely clamped for machining. This is thanks to uniquely self-adjusting jaw height feature of the BESSEY...
  • Tool News - BESSEY® NEW K Body® REVO™ JR (Junior)

    by American Woodworker Editors     Thursday, May 19, 2011
    BESSEY® NEW K Body® REVO™ JR (Junior) This new product series offers full-size parallel clamp performance in a new and more compact configuration and, at a great price point. March 1, 2011 - Long known for their premium full-sized K BODY...
  • Tool News - Rockler Sure-Foot™ F-Style Clamps

    by American Woodworker Editors     Thursday, May 5, 2011
    Rockler Sure-Foot™ F-Style Clamps Sure-Foot™ F-Style Clamps are easy-to-use and apply pressure right where it's needed. MEDINA, MN (April 26, 2011) - Glue-ups just became faster and easier with an upgraded F-style clamp from Rockler Woodworking...
  • Tool News - Clamp Edge

    by American Woodworker Editors     Friday, April 22, 2011
    Clamp Edge BORA Clamp Edge tool guides provide accurate cutting and versatility for jobsite tools. BORA™, a product division of Affinity Tool Works, offers its Clamp Edge™ line of straight edge tool guides. By providing a solution for straight...
  • Well-Equipped Shop - Box Joint Cauls

    by American Woodworker Editors     Tuesday, January 18, 2011
    Box Joint Cauls Gluing up box joints isn’t an easy task. Clamping across the middle of a box may seem like the best method, but this can cause the sides to bow, leaving gaps between the fingers. Rockler’s solution is to use stepped cauls that...
  • Well-Equipped Shop - Jorgenson Gear Clamp, Lever Clamp and ISD3 Expandable Clamp

    by American Woodworker Editors     Monday, July 19, 2010
    Bar Clamp Trio Jorgenson recently introduced a trio of newly designed bar clamps. The Lever Clamp comes in 6” and 12” capacities and is perfect for assembly work, where a lightweight, quickly adjustable clamp can make things so much easier...
  • Smaller Parallel-Jaw Clamps

    by American Woodworker Editors     Thursday, July 15, 2010
    Bessey’s UniKlamps are a smaller, lighter-weight version of their innovative K-Body parallel-jaw clamps. UniKlamps have 3-in. jaw capacity and come in 6-, 12- and 18-in. lengths. K-body clamps have 3-1/2-in. jaws and range in length from 12 in....
  • Tool News - Bessey DKX DuoKlamp Extender

    by American Woodworker Editors     Wednesday, April 28, 2010
    The BESSEY® DKX DuoKlamp Extender is an accessory for the Bessey DuoKlamp (6” – 24” lengths, 260 lbs clamping force, large jaws). The jaws of the DuoKlamp fit over a pair of jaw faces on the DKX unit and, in effect, extend the reach...
  • Tool News - Rockler Picture Frame Clamp

    by American Woodworker Editors     Tuesday, March 9, 2010
    Rockler Woodworking and Hardware recently introduced its new Miter Tight Picture Frame Clamp, offering an innovative approach to clamping picture frames. Getting perfectly aligned miters on picture frames has always been a challenge. No matter how carefully...