American Woodworker

Important Information >>

Syndication

Woodworking Tools

1 | 2 | Next
  • Tool News - Forrest Manufacturing WoodWorker I Blades for Festool Saws

    by American Woodworker Editors     Monday, August 2, 2010
    Forrest Manufacturing recently announced that the company now offers two metric versions of its deluxe Custom WoodWorker I Blades for use on Festool plunge cut circular saws. These two Custom WoodWorker I Blades are especially suitable for joinery and...
  • Woodworking Tool News - Forrest Sharpening / Repair Service

    by American Woodworker Editors     Monday, July 30, 2012
    Woodworking Tool News - Forrest Sharpening / Repair Service Forrest Manufacturing is providing in-factory sharpening and repairs of all makes of carbide-tipped circular saw blades. A properly performing blade is essential to delivering a good, reliable...
  • Woodworking Tool News - Forrest 20 tooth woodworker II

    by American Woodworker Editors     Thursday, February 2, 2012
    Forrest 20 tooth woodworker II Forrest Manufacturing’s 20-Tooth, 10” Woodworker II Blades are helping woodworkers and serious hobbyists make fast, accurate rip cuts in hardwoods without leaving burn or scorch marks. According to the company’s...
  • Well-Equipped Shop - Blade for Small Box Joints

    by American Woodworker Editors     Tuesday, January 18, 2011
    Blade for Small Box Joints If you’re a box-maker, you’ve probably considered many ways to join a box’s corners. How about 1/8" or 1/10"-wide finger joints? They’re very strong and have a sleek appearance—you’ve...
  • Tool News - Forrest Woodworker II Blade

    by American Woodworker Editors     Wednesday, October 7, 2009
    Forrest Manufacturing has improved their general purpose saw blade. The new 1048 Woodworker II has more teeth and a higher bevel than the original 40-tooth Woodworker II, making it exceptionally good for cross-cutting everything from soft woods to plywood...
  • Woodworking Tool News - Forrest Woodworker II ATBR

    by American Woodworker Editors     Friday, February 3, 2012
    A choice of four quality blades Forrest offers a choice of four 40-Tooth Woodworker II—ATBR blades. These are available in 10”and 12” versions. The two 10” blades have a 5/8” bore and can be ordered with either a 1/8”kerf...
  • Forrest Miter Master Saw Blades

    by American Woodworker Editors     Tuesday, October 4, 2011
    Forrest Miter Master Saw Blades Forrest’s wide selection of Miter Master Saw Blades continues to be a popular choice of industrial firms and commercial enterprises seeking to make fast, reliable miter cuts with no bottom splinters. These premium...
  • Tool News - Forrest's Custom Woodworker II Blades

    by American Woodworker Editors     Thursday, May 19, 2011
    Forrest's Custom Woodworker II Blades Blades are Factory-Customized to the Angle and Tilt Specified by Each Customer CLIFTON, New Jersey, January 19, 2011—Forrest Manufacturing’s Custom Woodworker II blades are playing an important role...
  • Tool News - Forrest Ultra Thin Woodworker II Blade

    by American Woodworker Editors     Wednesday, April 28, 2010
    Forrest Manufacturing just announced the Ultra Woodworker II. The Ultra Thin 080 Woodworker II is a version of the high-performance Custom Woodworker II blade but on a thinner scale. While the custom blade has a .125-inch (1/8") kerf and a .095 body...
  • Tool News - Forrest Manufacturing Square Top Blade

    by American Woodworker Editors     Wednesday, August 25, 2010
    Forrest recently announced the Square-Top Woodworker II blade. It's designed to produce quality finger joints, box joints and rabbets with flat tops and reduced resistance. Forrest’s blades cut a 90-degree square bottom, unlike other blades...
  • Forrest Ply Veneer Worker

    by American Woodworker Editors     Wednesday, November 30, 2011
    Forrest Ply Veneer Worker Forrest Manufacturing has developed a new blade designed specifically for providing rip and cross cuts of two-sided plywood, whether finished or unfinished. The Ply Veneer Worker (PVW) is a commercial-quality blade that excels...
  • Tool News - Forrest Manufacturing Chop Master

    by American Woodworker Editors     Wednesday, July 8, 2009
    Forrest Manufacturing has introduced the first blade in its new Signature Line of saw blades. The Signature Line Chop Master features more carbide teeth with new angles that produce a quieter cut and better splinter control with less effort. The new Signature...
  • Tool News - Forrest Thin-Kerf 48-tooth Woodworker II

    by American Woodworker Editors     Sunday, October 31, 2010
    Forrest Manufacturing just announced a thin kerf version of its popular 48-tooth (1048) Woodworker II blade. The thin kerf version of this general-purpose blade has been especially designed for lower-power saws, such as those that are 110 volt, 3/4 to...
  • Woodworking Tool News - A Ripping Good Time

    by American Woodworker Editors     Thursday, September 27, 2012
    A Ripping Good Time By Brad Holden If you're just starting to put together an arsenal of blades for sawing hardwoods, allow me to make a suggestion: Get a rip blade. Sure, a general-purpose blade does a reasonably good job of ripping boards, but just...
  • Tool News - Forrest Duraline Tenoning Blade

    by American Woodworker Editors     Tuesday, November 30, 2010
    Forrest Manufacturing just introduced a new blade for making mortise and tenon joints. The blade was created to help serious craftsmen produce strong, dependable tenons for chairs, tables, and cabinets, as well as for cutting bowl segments and other applications...