Bandsaw Resawing
POSITION THE FENCE and resaw your board! Be sure to use a push block and pushstick to keep your fingers well away from the action.

SET UP A FENCE to resaw the boards. Run one face of your halved log against the fence, and keep going until you’ve cut the entire log.
DRAW A LINE down the middle of the log using a pencil and straightedge, or snap a chalk line. With the log secured into the sled, saw the log in half.

Previous Page Next Page

Bandsaw Resawing Tool Up: Blade Selection & More
When Good Cuts Go Bad The ABCs of Resawing
The ABCs of Resawing (continued) Drying Wood & Veneering a Panel Bandsaw Upgrades

Feature Article Bandsaw Resawing August 2000
© 2000 American Woodworker Magazine ®